Resource Library

Radomes are a key part of antenna systems, which can seriously degrade transmitted and received signals. Modeling and simulation time for complex radomes can extend from days to weeks, and that also includes FSS structures embedded into them.

Safe and compliant electronic system design is important across all industries. Conforming to EMC regulations while reducing development costs and time requires the implementation of simulation throughout the product design lifecycle. With increas...

Even in the age of fast and accurate EM simulation solutions, developing complex passive microwave components remains a challenging task. A novel hybrid solver solution is now available to address this design challenge and significantly shorten th...

Altair offers wide ranging multi-physics solutions spanning across various disciplines. Altair Feko is a comprehensive computational electromagnetics (CEM) software used widely in the telecommunications, automobile, aerospace, and defense industri...

Using simulation to predict, analyze, optimize, and plan the coverage given by radio and radar systems is key to reduce development and planning times together with costs. Also, in some cases, this is the only feasible approach to identify and fix...

New technologies such as 5G, V2V-communication, e-mobility and IoT increase the number of electromagnetic field sources in the environment. When designing such electronic systems, compliance with electromagnetic radiation hazard standards (e.g., I...

Innovation and digitization are key factors when designing advanced detection systems, autonomous vehicles, and stealth technology, where electromagnetic simulation has become essential.

In this webinar, we will cover central concepts important to Radar Cross Section (RCS) and scattering calculat

A radome is a structural enclosure that protects antennas and electronics from harsh weather and environmental factors without degrading electromagnetic signals to the radar. It is designed to have minimal impact on the electrical performance of t...

ESS & Altair invites you to an engaging webinar on next-generation Robotics and Controls Lab. In this webinar, we will be demonstrating a unique visual approach to robotics by using a combination of Altair Digital-Twin technology & Altair Hardware...

Join us for this OnDemand webinar, where Northrop Grumman engineer Keith Snyder demonstrates Altair Feko simulations to compare with measured patterns of a slant 45-degree omni directional antenna on a rolled edge ground plane. Advantages of using...

Wireless electronic devices these days often support both Bluetooth and Wi-Fi connectivity. The 2.4 GHz Wi-Fi frequency band is very close to the Bluetooth operating frequency. The co-existence of these two technologies within the same device lead to interference issues.

This webinar presents Alt

באיזה אופן אנו מטפלים באתגרים אלקטרומגנטיים ע"י שימוש בסימולציות? מה הצרכים הטכנולוגיים של תחום הסימולציות האלקטרומגנטיות, ולאן הוא מתפתח? כיצד אלטאר ממשיכה להיות מובילה בתחום הסימולציות?

מה חדש בתוכנות האלקטרומגנטיות של אלטאר ? סקירת הכלים והחידושים לשנת 2020

במפגש זה נתמקד ביכולות בתחום הסימ

The Marine Engineering and Shipbuilding Industry is becoming even more important in the connected world. The ability to accelerate turnaround time and reduce cost is becoming a key driver to success. The use of simulation technologies to improve d...

Advancements in 3D printing and optimizing parts for additive manufacturing is changing medical industry’s production approaches. Applications include dental implants, bone replacements, prosthetics, surgical instruments and many more. ​

This webinar presents Altair’s solution for designing parts

Machine learning is a method of data analysis that automates analytical model building. As the antennas are becoming more and more complex each day, antenna designers can take advantage of machine learning to generate trained models for their phys...

In this webinar we showcase Altair’s unique electromagnetic simulation solutions combining antenna design and installed antenna performance with radio coverage analysis, including virtual flight and drive tests. We also cover fast modelling of rad...

In this webinar we showcase Altair’s electromagnetic simulation solutions, which uniquely combine antenna design and wireless connectivity for a broad array of communication technologies, including among others, 5G, IoT, WiFi and RFID. As the trus...

In this practical workshop we will present both the theory and background of the numerical techniques used, as well as presenting application examples and real-world cases studies on how such a process is used in the industry today. It will be a c...

Many problems of electromagnetic compatibility and interference involve cables, which either radiate through imperfect shields and cause coupling into other cables, devices or antennas, or which receive (irradiation) external electromagnetic field...

5G is the next evolution of communication networks. With an exponential increase in consumer demands for high-speed data, the existing technologies can only sustain this demand for the next few years. We need a new technology with new capabilities...

Characteristic Mode Analysis (CMA) enables a systematic approach to antenna design and antenna placement. The approach is based on insight in the fundamental resonance characteristics of antenna geometries and of the structures on which they are m...

Machine learning is a method of data analysis that automates analytical model building. As the antennas are becoming more and more complex each day, antenna designers can take advantage of machine learning to generate mathematical models for their...

Replacement of traditional combustion engines with an electric powertrain, bring electro-mechanical induced tonal and high-frequency whine noise. In addition, tire and aerodynamic turbulent noise become more prominent in the absence of a standard ...

The key element of an electric vehicle (EV) is the battery and batteries are known to produce heat during their charge-discharge cycle. An efficient thermal management system (TMS) is of paramount importance. The battery TMS affects the cost, lif...

Watch this webinar to see a demonstration of a multiphysics simulation approach using the Altair HyperWorks platform for the analysis of airborne radomes for electromagnetic , structural, aerodynamic, and bird strike performances.

New features and benefits of Altair Feko and WinProp in the 2019 release

This webinar will give an overview of WinProp's capabilities for the radio planning with real use cases showing the performance of WinProp in topographical, built-up, industrial, and indoor scenarios including live demonstrations at the end.

Altair Feko is a well-known and trusted numerical analysis tool for a wide range of problems in electromagnetics. Its efficient solvers make it a very good tool to utilize as part of a process that explores solution spaces or performs advanced optimisation tasks in electromagnetics.
Altair Hyper

Key challenges for train/metro operators are increasing traffic volumes, ensuring passengers safety and security during their journey, as well as providing real time multimedia information and access to social networks in stations and tunnels. To ...

Given EVs are gaining momentum and the recent Govt. of India’s strict localization norms in EVs to avail incentives, Altair announces a 3-part webinar series to introduce its powerful and most comprehensive industry solution set for E-mobility fro...

This webinar shows how Altair WinProp considers the full environment including buildings, cars, street objects in order to get accurate representations of the radio waves impinging on the installed car antennas and the multipath radar channels inc...

Ms Ke Li from Xidian University, China received the prestigious title of winner in the 2017 competition.

This winning entry covers a dual multiple-input, multiple-output (MIMO) antenna design for a smart phone operating in the LTE 13, GSM850 and GSM900 bands.

r S Vinoth Kumar from Indian Institute of Technology Kanpur received an honorable mention in the 2017 Competition for his entry.

Knots find interesting applications in various field of electromagnetics. In Mr Kumar’s work a dual-polarized knot antenna is designed and optimized completely using fe

This 25-minute webinar covers the material characterization and optimization of a radar dome (radome) build out of carbon and fiberglass. Also to be discussed is the design and optimization of a radar antenna and the simulation of a radar integrat...

Altair Feko’s broad solver technology offering is well suited to the efficient and accurate simulation of electrically very large structures.

In this webinar we will offer several use cases of Naval related electromagnetic simulations using Feko.

Besides more general problems like antenna plac

This webinar will give an overview and update on the EM simulation solutions (FEKO, Flux and WinProp) in HyperWorks for the aerospace industry and its segments covering applications and real use cases from antenna design and placement, EMC, RCS an...

In this webinar presented by the University of Stellenbosch in South Africa, we will look into some of the key analysis aspects that are currently being undertaken for the Square Kilometre Array (SKA) Phase 1 project using HyperWorks.

FEKO 14.0 will be released with a myriad of new automation features. Extensive support for automation in CADFEKO has been added. In addition, control over custom dialogs has been improved. An introductory overview of automation will be presented, ...

The release of FEKO 14.0 will be the first version of FEKO released under altair HyperWorks since the acquisition of EM Software & Systems S.A. by Altair Engineering last year.

In addition to discussing some changes to this HyperWorks integration (such as licensing), the webinar will introduce ne

One of the key features in FEKO is that it includes a broad set of unique and hybridized solvers, giving the possibility to combine methods to solve complex and electrically large problems, with all solvers included in the same package.

Presented by Jordi Soler, Director of Business Development,